Nachi PCR-5B-30A-FGP-9222F 333/W4439 swing gearbox for JCB 85Z-1 ,86C-1, 90Z-1, 100C-1, Sany SY75 ,SY75C, SY85,SY85C mini excavator
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+86 199 246...
+86 199 2461 6345
China
China
Romania
Romania
Romania
Poland, Koziegłowy
Component: Main Hydraulic Swing Drive Motor Assembly (Dynamic Rotation Motor)
Manufacturer Model Number: Nachi PCR-5B-30A-FGP-9222F (PCR Series Architecture)
OEM Cross-Reference Part Numbers:
JCB: 333/W4439, 336/E4311, 336/E4315 (333W4439, 336E4311, 336E4315)
Sany: 60133878
Machine Compatibility:
JCB: 85Z-1, 86C-1, 90Z-1, 100C-1
Sany: SY75, SY75C, SY85, SY85C Midi Excavators
Condition: Genuine Original New / Premium OEM Specification Equivalent
2. Technical Specifications
Motor Type: Fixed Displacement Axial Piston Swing Motor with Integrated Multi-Stage Planetary Gearbox
Output Performance: High-torque rotation profile engineered specifically for 8.0 to 10.0-ton midi excavator upper-structure swing operations.
Integrated Control Network: Features dual crossover relief valves, anti-cavitation check valves, anti-rebound control logic, and an automatic mechanical parking brake.
Drive Interface: Precision-machined mounting flange with a heavy-duty output pinion shaft designed for direct engagement with the machine's slew ring gear.
3. Critical Installation Requirements
Swing Motor Housing Priming (Mandatory)
Before starting the engine or engaging upper-structure rotation, pre-fill the swing motor casing with clean, fresh hydraulic fluid through its highest case drain port. Running an axial piston motor dry—even for a few seconds—will score the swash plate and piston slippers, causing immediate total loss of pressure.
Verify Case Drain Line Backpressure
Inspect the low-pressure case drain hose returning to the main hydraulic oil reservoir. Ensure there are no kinks, sharp bends, or restriction points. Excessively high case drain backpressure will blow out the main shaft seal and contaminate the planetary gearbox lubricant.
System Air Bleeding & Initial Startup Procedure
After mounting and pre-filling the housing, loosen the top air bleed port on the motor manifold. Crank the engine with the fuel delivery disabled until clear, bubble-free hydraulic oil flows out, then retighten the plug. Allow the machine to idle at low RPM with zero load for 10 to 15 minutes to purge remaining trapped air from the loop.
Hydraulic System Decontamination
If replacing a motor that suffered severe internal mechanical breakdown, thoroughly drain and flush the main hydraulic fluid reservoir, clean oil cooler lines, and replace all return, suction, and pilot filter elements prior to starting the engine.
4. Frequently Asked Questions (FAQ)
Q: Are JCB part numbers 333/W4439, 336/E4311, and 336/E4315 fully interchangeable?
A: Yes. These part numbers represent standard JCB factory revisions, engineering updates, and supersessions across the 85Z-1, 86C-1, 90Z-1, and 100C-1 model lines. All cross-reference directly to the Nachi PCR-5B-30A platform with identical physical frame dimensions, shaft splines, and hydraulic port threads.
Q: My Sany SY75 or JCB 86C-1 drifts or over-rotates when stopping on an incline. Is the swing motor at fault?
A: Uncontrolled drifting or over-rotation when stopping usually indicates worn internal dynamic brake discs, compromised crossover shock-relief valve seats, or scored barrel-to-plate surfaces inside the motor casing. Installing a replacement motor restores exact position holding and swing stopping responsiveness.
Q: Does this unit arrive complete with the control valve manifold installed?
A: Yes. The Nachi PCR-5B-30A-FGP-9222F is delivered as a complete drop-in assembly, pre-fitted with the axial piston motor section, integrated planetary reduction gear stage, and pre-calibrated valve manifold block.
5. Shipping & Logistics
Packaging: Preserved with rust-inhibiting anti-corrosion storage oil, fitted with plastic port caps, and bolted securely inside an export-safe protective wooden crate.
Transit Time: Global express air freight via DHL/FedEx/UPS typically delivers within 3 to 7 business days directly to your workshop or job site.