MicroStep PLS 7501.25PG plasma cutting machine
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 40...
Show
+49 162 4027581
Germany, Kaiserslautern
Germany, Nürtingen
Germany, Nürtingen
Germany, Nürtingen
Germany, Nürtingen
Germany, Nürtingen
Germany, Nürtingen
Germany, Nürtingen
Germany, Nürtingen
Germany, Nürtingen
Germany, Kaiserslautern
Germany, Pullach
Slovakia, Buzica
Germany, Nürtingen
Germany, Nürtingen
Netherlands, Rotterdam
Number of portals: 1
Number of Z-axes: 2
Number of burners: 2
Max cutting thickness: 50 mm
Working speeds: 0–100 mm/s
Working field – longitudinal movement: 7500 mm
Working field – cross movement: 2500 mm
Working field – vertical movement (plasma): 150 mm
Working field – vertical movement (gas): 200 mm
Working field – vertical movement (gas-rotator): 200 mm
Drilling head BEM 12 vertical movement: 80 mm
Max working zone width: 4000 mm
Max working zone length: 35,000 mm
Max deviation longitudinal: 0.5 mm / 3000 mm
Max deviation cross: 0.5 mm / 2500 mm
Electrical coverage (mechanical part): IP 43
Drives (Control Technique):Longitudinal axis: 2 × DCM 6C 30/14 A1Cross axis: 2 × DCM 3B 35/06 A1Vertical axis: 2 × DCM 2C 30/03 B1
Longitudinal axis: 2 × DCM 6C 30/14 A1
Cross axis: 2 × DCM 3B 35/06 A1
Vertical axis: 2 × DCM 2C 30/03 B1
Gear ratios:Longitudinal axis (belt): i = 14.81483886 mm/revCross axis (belt): i = 13.33335498 mm/revVertical axis (belt + screw): i = 2 mm/rev
Longitudinal axis (belt): i = 14.81483886 mm/rev
Cross axis (belt): i = 13.33335498 mm/rev
Vertical axis (belt + screw): i = 2 mm/rev
Ambient temperature: 5–40 °C
Max relative air humidity: 90% at 20 °C
Atmospheric pressure: 84–107 kPa
Dustiness: 200 mg/m³
Environment type: Common (STN 330300, exception operational temps N32)
Additional equipment
Plasma source: 1 × HPR 260 AGC (58 mm)
Gas burner: 1 × acetylene (Bir), including gas rotator
Drilling head: BEM 12
application type: Cutting
Location: Lithuania
machine type: Plasma Cutting Machine
control unit brand: MicroStep
Control Brand: MicroStep
Control Model: IMSNC
Machine Depth: 10169 mm
Number of Axes: 3