KHS Innopas P II SG 30-200 pasteurizer
≈ US$128,100
Menslage
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Germany, Burgwald-Ernsthausen
Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format)
Treatment area: 113.5 m²
Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative
Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l)
Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format
Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l)
Pasteurization units: approx. 5 PE
Machine water content: approx. 14.4 m³
Water consumption at nominal capacity: approx. 1.5 m³/h
Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h
Electrical connection: 400 V, 50 Hz
Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm
Required entry opening: approx. 2.7 x 3.0 m
Noise level: ≤ 85 dB(A) according to ISO 3744
Immediately. Location: Germany. Loading by the seller is possible
net weight: approx. 27,500 kg
engine power: approx. 66.2 kW
Overview
This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles
built in 1996 by KHS (Klöckner Holstein Seitz
Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative)
it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format
at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating
12.3 min pasteurization
15.0 min cooling) at approx. 5 pasteurization units
The main control is a Siemens SIMATIC S5 PLC
the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored
with the conveyor belt sections and components palletized - ready for immediate collection
Technical data
Equipment
Siemens SIMATIC S5 PLC (main control)
Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel
Danfoss frequency drives
Modular plastic conveyor belt with drainage openings
belt sections palletized
External pump assemblies and inspection windows
Electrical cabinets with main disconnect switch
Original KHS documentation (datasheets and drawings)
Condition
Used. The machine is completely dismantled and stored
belt sections
piping and components are palletized for transport. The machine can be visited on request
Availability