Graziano GT 300 metal lathe
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: IT
Counter Spindle: yes
Driven Tools: yes
Max. Bar Diameter: 52 mm
Tool Stations: 12
Spindle Power: 10 kW
Taper Size: VDI 30
Tool turret: 12 positions, VDI 30
Control unit: MTC 200
Spindle nose: ASA 5"
Constant power speed range: 800–6,000 rpm
Max. spindle torque: 114 Nm at 800 rpm / 130 Nm at 1,000 rpm
Spindle power: 10 kW continuous / 14 kW intermittent
Chuck diameter: 175 mm
Spindle bore diameter: 66 mm
Front spindle bearing diameter: 100 mm
Spindle bearing lubrication: Grease
Speed ranges: 1
Distance between centers: 590 mm
Center height: 190 mm
Swing over bed: 330 mm
Swing over slide: 260 mm
Max. turning diameter: 230 mm
Bar capacity: 52 mm
Z-axis: 32 × 10
X-axis: 32 × 10
Z-axis rapid traverse: 30 m/min
X-axis rapid traverse: 30 m/min
C1-axis rapid speed: 100°/min
C1-axis torque: 130 Nm
Z-axis thrust: 4,500 N (CNC adjustable)
X-axis thrust: 4,500 N (CNC adjustable)
Linear axes X/Z resolution: 0.001 mm
C-axis resolution: 0.001° (optional)
Driven tools: Yes
Turret: Sauter Type 0.5.450.216
Tool positions: 12
Tool interface: VDI 30
Tool shank section: 20 × 20 mm
Driven-tool speed: 4,000 rpm
Driven-tool power: 4 kW
Driven-tool torque: 20 Nm
Connected load: 24 kVA
400 V line protection fuses: 50 A
400 V line circuit breaker: 39 A
Connection cable section: 4 × 10 mm²
Max. working pressure: 45 bar
Tank capacity: 40 L
Pump flow: 14 L/min
Flow to tool: 14.5 L/min
Pressure: 5 bar
Capacity: 10 L (with heat exchanger)
Control: MTC 200
Main configuration
Main spindle
Working area / Capacity
Ball screws
Feed / Axes
Measuring system
Z-axis: Absolute rotary encoder (linear optional)
X-axis: Optical scale
Tool turret / Driven tools
Electrical equipment
Hydraulic unit
Axis lubrication unit
Tank capacity: 2.7 L
Coolant system
Tank capacity: approx. 240 L
Pump flow: 30 L/min
Head cooling tank
Control unit