New Metalika RVP-2000/1 Single layer block machine block making machine
≈ US$104,300
Sopot
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+381 66 2...
Show
+381 66 232223
+381 11 82...
Show
+381 11 8251400
+381 11 82...
Show
+381 11 8251946
Serbia 
Serbia, Sopot
Serbia, Sopot
Turkey, Trabzon
Germany, Munich
Turkey, İzmir
Turkey, Trabzon
Turkey, Trabzon
Turkey, Trabzon
Saudi Arabia, Riyadh
Finland, HKI
Turkey, Trabzon
Denmark, Kopengagen
Belgium, City of Brussels
Lithuania, Vilnius
Turkey, İzmir
Turkey, Tekirdağ
Czechia, Golčův Jeníkov
Senegal, Dakar
Turkey, İzmir
Mexico, Ecatepec de Morelos
RVP-2000/1 automatic concrete block making machine can be configured with a pallet stacker and be a short automatic production line or in a configuration with elevators and packaging stations to complete the automatic production of concrete blocks.
The configuration of the production line depends on the desired level of automation, capacity and budget.
It is important to understand that the equipment we produce is modular and compact in design, which means that you can add additional equipment in the future and improve (raise) the level of automation.
RVP-2000 and RVP-2000/1 are the best-selling automatic vibratory presses in our region, in addition to the quality and vibration technology, our equipment has the highest level of standard equipment included in the price.
VIBRATION TECHNOLOGY:
BOTTOM VIBRATION:
"SINHRO" VIBRATION TECHNOLOGY (*intellectual property of the company "METALIKA")
The vibration technology "SINHRO" METALIKA has synchronized, controlled vibrations for maximum product quality with the shortest cycle periods, driven by a frequency regulator.
- Even distribution of vibrations in all positions of the vibrating plate.
- Synchronized vibration system.
- Possibility of adjusting the strength of the vibration force and frequency adjustment.
Drive on "SINHRO" vibrators are electric motors of the German manufacturer "LENZE" (WEG) with a power of 2x 5.5kW. The highest efficiency of the electric motor is marked "IE3"
*Optionaly vibration technology can be "SERVOFLEX" powered with servo motors.
VIBRATION STRENGTH:
Frequency: 50Hz
Motor speed (rpm): 3.000rpm
Centrifugal force of vibrations: 70kN
UPPER VIBRATION:
Vibrations on the stamp (upper vibrations) consist of two vibrators of the Italian manufacturer "OLI"
The vibrators are positioned with a vibrating plate on the mold that evenly transmits vibrations to the upper tool (upper mold)
CENTRAL AUTOMATIC LUBRICATION OF VIBRATORS:
The system is standard equipment for the automatic vibropress RVP-2000 with temperature measurement.
Central lubrication ensures a longer service life of the "SINHRO" vibrator.
A solution for overloaded work on the vibratory press and avoiding overheating of the vibrator due to careless maintenance.
When measuring the temperature, in case of exceeding the temperature, the vibratory press is automatically turned off and an alarm is triggered to prevent overheating.
TECHNICAL DATA:
Length: 7.940 mm
Width: 2.510 mm
Height: 3.600 mm
Weight: 9.000 kg
Minimum height of concrete product: 25 mm
Maximum height of concrete product: 400 mm
Maximum height of curb: 350 mm
Pallet (pad) dimensions: 1200x550 mm
Usable surface of the mold: 1130x500 mm
Number of pieces of concrete pavers 10x20 cm in the mold: 20 pieces
Number of pieces of concrete hollow blocks 20x20x40 cm in the mold: 5 pieces
Automatic operation: Yes, PLC “Schneider Electric”
Installed power: 30 kW
Oil tank: 400L
Hydraulic pressure: 170 bar
Voltage (V): 3x400
Control voltage: 24V, 230V
Hydraulic voltage: 24V
CAPACITY:
Concrete paving stones (pavers) 10x20cm, height 6cm, without fine layer: 824 m2
Concrete hollow blocks 20x20x40cm: 8.000 blocks
All capacities are calculated as maximum - 100% efficiency in ideal conditions for 8 hours of operation.
When calculating real production capacities, take into account the actual efficiency factor of about 80% and other factors that may affect productivity, such as: properties of the concrete mix (concrete recipe), effective work of workers (with breaks), concrete delivery, concrete product design and settings of the RVP-2000 vibratory press.