Parti med ventiler och styrningar för gas / olja pneumatic valve for industrial equipment for sale by auction
≈ $10.37
Borås6667 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
Sweden 
€9.04
Netherlands, Barneveld
Uzbekistan, Tashkent
Netherlands, Wekerom
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Germany, Freiberg am Neckar
Seller information
LP Väst hanterar denna auktion på uppdrag av säljaren.
För mer information eller för att boka tid för visning vänligen kontakta
Tobias Melander 033-103031 eller show contacts
Finansiering erbjuds via vår samarbetspartner Edge finanslaget.
Kontakta Tobias på tel 033-103031 alt: show contacts för en anpassad offert efter era önskemål.
Sedvanlig kreditprövning krävs.
"Vi erbjuder sunda finansieringslösningar till företag som planerar att investera i nya maskiner eller annan utrustning. Med hög servicegrad, flexibilitet och kunskap skapar vi och våra Edge Partners tryggare framtidsutsikter och ökad konkurrenskraft.
Vi tycker helt enkelt att bra verksamheter förtjänar en finansieringskontakt som ställer upp och är engagerad. Är du av samma uppfattning, välkommen till Edge Finanslaget"
LP Väst kan även ombesörja transport genom vår samarbetspartner Janssons entreprenad AB
Kontakta Alexandra på mail: show contacts för prisförslag.
----
This auction is handled by LP Väst on behalf of the seller.
For more information or to book a viewing time, please contact
Tobias Melander show contacts or show contacts
We also offer transport services through our partner Janssons entreprenad AB
Contact Alexandra at show contacts
to get a price estimate.
General conditions
Sales commission is included in your bid. Auction charges and VAT is added when applicable.
Payment charges (kr 250,- / EUR 25) will be added.
All invoices have 5 days payment terms.
Payment must be registered before seller can be contacted for collection of purchased items
All purchases must be collected within 21 days. NOTE! We expect buyer and seller to cooperate on arranging collection according to the current restrictions and instructions from the authorities.
An agreement MUST be made with the seller prior to collection
The auction item is approved bu the buyer at collection.
The buyer is responsible for all costs with regards to pick up, transport and export.
Overall condition: Object(s) working satisfactory when last used
Seller / Auction broker: LP Väst
Location: Borås, Sweden
Parti med ventiler och styrningar i syrafast rostfritt stål
Tidigare använd vid en biogasanläggning
Innehåller bland annat
2 st: Rosemount 3051SAL1CD3AA1A1020 konfigurerad nivåtransmitter inom Rosemount 3051S-serien
designad för att mäta vätskenivåer i tankar eller silos
Mätområde: -1000 till +1000 tum H₂O (cirka -25 till +25 meter H₂O)
Utgång: 4–20 mA med HART®-protokoll
Konstruktion: Coplanar™ plattform för integrerad installation utan behov av separata manifolder eller rörsystem
Kalibrering: Fullständig kalibrering över hela mätområdet
Certifieringar: SIL 2/3 enligt IEC 61508
Övriga funktioner: Inbyggd LED-display för visuell indikation
transientskydd och omfattande diagnostik
Flertal ventiler och vred samt rör
1 st OMAL J4CPG1806 pneumatisk vinkelventil
(angle seat valve) i rostfritt stål
avsedd för industriella
processer där hög flödeskapacitet och pålitlig funktion är
avgörande
3 st Air Torque AT201U S12 A pneumatisk vinkelaktuator av
hög kvalitet
designad för industriella applikationer som kräver
pålitlig och exakt styrning av ventiler
Maximalt arbetstryck: 8 bar
Drehmoment vid 6 bar: Max: 43,3 Nm Min: 26,5 Nm
Temperaturområde: -40 °C till +80 °C
Rotationsvinkel: 90°
1 st Haitima HTS-092-SR12/17-F05/F07 pneumatisk
vinkelaktuator av hög kvalitet
designad för att automatisera
ventiler i industriella processer
Maximalt arbetstryck: 8 bar
Maximalt vridmoment vid 5 bar: 65,1 Nm
Minimalt vridmoment vid 5 bar: 35,1 Nm
Temperaturområde: -20 °C till +80 °C (standard)
40 °C till
+80 °C med silikon O-ringar
Rotationsvinkel: 0–90°
1 st Rotork YT-1000 elektro-pneumatisk positioner som används för att styra pneumatiska linjära eller roterande ventilaktuatorer baserat på ett elektriskt styrsignalförlopp
Ingångssignal 4–20 mA DC
Impedans 250 ±15 Ω
Ingångstryck 1,4–7 bar (20–100 psi)
Utsignaltryck 0–2 bar (0–30 psi)
Skyddsklass IP66
NEMA 4X
Temperaturintervall -20 °C till +70 °C
Luftförbrukning 2 L/min vid 1,4 bar
Flöde 80 L/min vid 1,4 bar
1 st Haitima XHTS-092-12/17-F05/F07 pneumatisk
vinkelaktuator
Se bilder för övriga delar och komponenter
Informationen är framtagen efter bästa förmåga men ej bindande i detalj
Parts with valves and controls in acid-resistant stainless steel
Previously used at a biogas plant
Contains among others
2 pcs: Rosemount 3051SAL1CD3AA1A1020 configured level transmitter within the Rosemount 3051S series
designed to measure liquid levels in tanks or silos
Measuring range: -1000 to +1000 inches H₂O (about -25 to +25 meters H₂O)
Output: 4–20 mA with HART® protocol
Construction: Coplanar™ platform for integrated installation without the need for separate manifolds or piping systems
Calibration: Full calibration across the entire measuring range
Certifications: SIL 2/3 according to IEC 61508
Other features: Built-in LED display for visual indication
transient protection
and extensive diagnostics
Several valves and knobs as well as pipes
1 pc OMAL J4CPG1806 pneumatic angle valve
(angle seat valve) in stainless steel
intended for industrial
processes where high flow capacity and reliable function are
crucial
3 pcs Air Torque AT201U S12 A high-quality pneumatic angle actuator designed for industrial applications that require
reliable and precise control of valves
Maximum working pressure: 8 bar
Torque at 6 bar: Max: 43.3 Nm Min: 26.5 Nm
Temperature range: -40 °C to +80 °C
Angle of rotation: 90°
1 pc Haitima HTS-092-SR12/17-F05/F07 high-quality pneumatic
angle actuator
designed to automate
valves in industrial processes
Maximum working pressure: 8 bar
Maximum torque at 5 bar: 65.1 Nm
Minimum torque at 5 bar: 35.1 Nm
Temperature range: -20 °C to +80 °C (standard)
40 °C to
+80 °C with silicone O-rings
Angle of rotation: 0–90°
1 pc Rotork YT-1000 electro-pneumatic positioner that is used to control pneumatic linear or rotary valve actuators based on an electrical control signal sequence
Input signal 4–20 mA DC
Impedance 250 ±15 Ω
Input pressure 1.4–7 bar (20–100 psi)
Output pressure 0–2 bar (0–30 psi)
Protection class IP66
NEMA 4X
Temperature range -20 °C to +70 °C
Air consumption 2 L/min at 1.4 bar
Flow 80 L/min at 1.4 bar
1 pc Haitima XHTS-092-12/17-F05/F07 pneumatic
angle actuator
See pictures for other parts and components
The information is prepared to the best ability but not binding in detail