Verified seller 
TBT ML 300-4-1450 drilling machine for sale by auction
≈ US$4,688
Bad Emstal
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
€3,500
≈ $5,277
≈ US$4,102
Germany, Bad Emstal
€180
≈ $271.40
≈ US$211
Germany, Huisheim
€300
≈ $452.30
≈ US$351.60
Germany, Huisheim
€350
≈ $527.70
≈ US$410.20
Germany, Huisheim
€1,900
≈ $2,865
≈ US$2,227
Germany, Euskirchen
€6,900
≈ $10,400
≈ US$8,087
Germany, Euskirchen
€750
≈ $1,131
≈ US$879.10
Germany, Euskirchen
€900
≈ $1,357
≈ US$1,055
Germany, Bad Saulgau
€180
≈ $271.40
≈ US$211
Germany, Munich
Drilling method: Lip drilling (ELB)<br>
Number of Spindles: 4<br>
Spindle spacing: 120 mm<br>
Center height above floor: 1,150 mm<br>
Drill carriage stroke: 1,450 mm<br>
Drilling depth approx.: 700 mm<br>
Drilling range (in steel St60): Ø 4 – 30 mm (max. Ø 35 mm)<br>
Operating hours: 43.220h<br>
Electrical data:<br>
Operating voltage: 400 V AC<br>
Frequency: 50 Hz<br>
Total connected load: 50 kW<br>
Rated current: 100 A<br>
Main fuse: 125 A<br>
Control: Siemens S7-300 with OP177 <br>control panel
<br>
Processing unit:<br>
Main spindle drive: Siemens 1PH7107-7QF02-0BKO – 9.0 kW – 1,500–9,000 rpm⁻¹<br>
Spindle Ratio: 17K28/76 and 17K55/112<br>
Spindle speed: 1,000–6,100 min⁻¹<br>
Feed drive (Z-axis): Schneeberger / Siemens ball screw 40×10×1740 mm<br>
Feed speed: 10–15,000 mm/min<br>
Rapid traverse: 15 000 mm/min<br>
Drive motor: Siemens 1FK7086-7AF71-1FH5 – 28 Nm – 3 000 rpm⁻¹<br>
<br>
Workpiece clamping:<br>
Tailstock drive: SEW RF47DV132S2 – 5.5 kW – 250 min⁻¹<br>
Timing belt pulleys: 60 T10/35 and 97 T10/35<br>
Pressure sleeve: Spieth DSM 30.1<br>
Proximity switch: Balluff BES516-325-E5-Y-S4<br>
<br>
Coolant and chip system:<br>
Coolant system: HSD 400, pure oil 700 l / dirty oil 1 000 l<br>
High Pressure Pump: Moog Radial Piston Pump – 7.5 kW – 2–194 l/min – 33 bar<br>
Chip conveyor: Astos magnetic belt – 0.25 kW – 1 375 min⁻¹ – 450 mm usable width – approx. 75 kg/h<br>
<br>
Additional units:<br>
Chip centrifuge: Mayfran VBU 1000 – 1.5 kW – 500 l/min<br>
Gravity filter: Resy 803/710 – 30 μm – 350 l/min<br>
Submersible pump: Schmalenberger Z40-13/2-2.2 – 2.2 kW – 500 l/min<br>
Air cooler: Sesino AP830-EB – 108,000 kJ/h – 0.9 kW<br>
Hydraulic power unit: Mevesta – 0.37 kW – 7 l/min – 65 bar<br>
Pneumatic unit: Bosch – 5–8 bar – filter fineness 40 μm<br>
<br>